> For the complete documentation index, see [llms.txt](https://docs.ownchat.app/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.ownchat.app/how-to-run-campaign-inside-ownchat/navigate-and-overview-of-the-campaigns/drip-campaign.md).

# Drip Campaign

### Overview &#x20;

A Drip Campaign allows you to send a sequence of WhatsApp template messages to a selected audience over a scheduled period. You can configure multiple message steps, personalize messages using contact fields, attach media, set delivery conditions, retry failed sends, and define goal conditions to stop further messages when a specified goal is met.

{% embed url="<https://app.supademo.com/demo/cmvg8gpsh05y1qmh2q8ypffi7?utm_source=link>" %}

A single drip campaign supports a maximum of 10 message steps.

### 1. Create a Drip Campaign &#x20;

1. Click Campaign in the left sidebar to open the campaign management tools.

{% embed url="<https://app.supademo.com/demo/cmvgixowb01rvxr0jfxzcvs31?utm_source=link>" %}

2. Click Add Campaign to create a new campaign.

{% embed url="<https://app.supademo.com/demo/cmvgize92000lxb0jvkrx2ej2?utm_source=link>" %}

3. Enter a name in the Campaign Name field.

{% embed url="<https://app.supademo.com/demo/cmvgk6j0x023vxl0juyywdjfu?utm_source=link>" %}

4. Click Select Segments to choose the audience for the drip campaign.
5. Click the Select Segment field to view the available Segment V2 audiences.

{% embed url="<https://app.supademo.com/demo/cmvgk86j9020dvj0js9uxgyy9?utm_source=link>" %}

6. Select the required audience, such as Entry: Ownchat leads starts 7th October 2026.

{% embed url="<https://app.supademo.com/demo/cmvgka06e0212xr0jzlc9fyns?utm_source=link>" %}

7. Click Next to proceed to the message configuration step.

{% embed url="<https://app.supademo.com/demo/cmvgkc5xn0218xr0jxd79en8g?utm_source=link>" %}

### 2. Configure Audience Enrollment and Delivery Conditions &#x20;

#### Enroll Contacts Who Join Later &#x20;

1. Locate the Enroll contacts who join later toggle.

{% embed url="<https://app.supademo.com/demo/cmvgkdjvi021axr0jqgb018yf?utm_source=link>" %}

2. Enable the toggle to automatically enroll new contacts who join the selected segment.
3. Disable the toggle if new contacts should not be automatically enrolled.

{% embed url="<https://app.supademo.com/demo/cmvglhnvu01ck0f0j6zd1fqa7?utm_source=link>" %}

Choose the setting based on whether the campaign should include contacts who join the segment after the campaign is configured.

#### Require Delivery Before the Next Step &#x20;

1. Locate the Require delivery before next step toggle.
2. Enable it to require successful delivery of the current message before the contact proceeds to the next step.

{% embed url="<https://app.supademo.com/demo/cmvglpe3f023tvj0j0pqc6hcy?utm_source=link>" %}

3. Disable it to remove this delivery requirement between steps.

{% embed url="<https://app.supademo.com/demo/cmvgmbmzu01fm0f0jqkg2qg3y?utm_source=link>" %}

Review these settings before configuring the messages to ensure the drip journey follows the intended enrollment and delivery behavior.

### 3. Configure the First Message Step &#x20;

#### Select a WhatsApp Template &#x20;

1. Click Select Template to open the available WhatsApp templates.
2. Locate the required template, such as t19\_deepavali\_store\_tim.
3. Select the checkbox on the template card.

{% embed url="<https://app.supademo.com/demo/cmvgmq94x029oxr0jtbzhwvad?utm_source=link>" %}

4. Click Select to apply the template, if prompted.

#### Map Template Variables &#x20;

Template variables allow you to personalize messages using contact information or predefined fallback text.

1. Click the first Select Value field to configure the value for the {{1}} placeholder.
2. Select name from the dropdown to map the contact's name to the variable.

{% embed url="<https://app.supademo.com/demo/cmvgoq9mz001xyh0j9g8ywbyx?utm_source=link>" %}

3. Click Enter fallback value and enter a default value for the name variable.

{% embed url="<https://app.supademo.com/demo/cmvgoucss000bxf0jqox2o484?utm_source=link>" %}

4. Click the next Select Value field to configure the {{2}} placeholder.
5. Select Use Fallback Value if you want to use fixed text instead of a contact field.

{% embed url="<https://app.supademo.com/demo/cmvgp13hk000gw70js03kglqb?utm_source=link>" %}

6. Click Enter fallback value and enter the fallback text for the store hours variable.

{% embed url="<https://app.supademo.com/demo/cmvgp46a80035yw0jithb14c8?utm_source=link>" %}

Repeat this process for all variables used in the selected template. Ensure each variable is mapped to the correct contact field or fallback value.

{% embed url="<https://app.supademo.com/demo/cmvgpcu4h0041y30jn9n4l584?utm_source=link>" %}

#### Schedule the First Message &#x20;

1. Click the Send at field to open the date and time picker.

{% embed url="<https://app.supademo.com/demo/cmvgpfsix004yxf0jc9cu5fhp?utm_source=link>" %}

2. Select the required date, such as 20 October 2026.
3. Select the required hour, such as 11 AM.
4. Click OK to confirm the scheduled date and time.

{% embed url="<https://app.supademo.com/demo/cmvgph222003gyw0jpsq5l52g?utm_source=link>" %}

Verify the schedule before proceeding to the next message step.

### 4. Add Additional Message Steps &#x20;

1. Click Add Step to add another message to the drip campaign.

{% embed url="<https://app.supademo.com/demo/cmvhlpqf1000a3c0jqb8vpghr?utm_source=link>" %}

2. In Step 2, click Select Template.

{% embed url="<https://app.supademo.com/demo/cmvhltq9z000c3c0jltiijxrq?utm_source=link>" %}

3. Locate the required template, such as t15\_deepavali\_reward\_po.
4. Select the checkbox on the template card.

{% embed url="<https://app.supademo.com/demo/cmvhlv7jl00fz2d0jiuoxdmf6?utm_source=link>" %}

5. Click Next to continue with the selected template.

{% embed url="<https://app.supademo.com/demo/cmvhlyvm800ok160j7sflo8qf?utm_source=link>" %}

6. Click Add Files to upload an image from your media library. You can select the default image provided with the template or choose a different image. The image selected here will be sent to customers along with the template message content.

{% embed url="<https://app.supademo.com/demo/cmvhn2j7e00p0160jxldbx97r?utm_source=link>" %}

7. Select the required image, such as the Ownchat template image.
8. Click Send selected files to attach the selected media.

{% embed url="<https://app.supademo.com/demo/cmvhn5az200r02d0jkemmj0g0?utm_source=link>" %}

9. Use the Value dropdown to map each template variable to the appropriate contact field or fallback value.
10. Click Select to apply the template.

{% embed url="<https://app.supademo.com/demo/cmvhnd9uh009h190jkpbgd04i?utm_source=link>" %}

11. Configure the message's send date and time.<br>

Repeat these steps to add more messages to the drip journey.

Important: A single drip campaign supports a maximum of 10 message steps. Once the 10th step has been added, you cannot add another message step to that drip campaign.

{% embed url="<https://app.supademo.com/demo/cmvhlrake00fx2d0jqe7yjohy?utm_source=link>" %}

### 5. Configure Message Scheduling &#x20;

Each message step can be scheduled according to the requirements of the drip journey.

#### Schedule Messages Using a Specific Date and Time &#x20;

1. Click the Send at field for the required step.
2. Select the desired date.
3. Select the desired hour and time.
4. Click OK to confirm the schedule.

Repeat the process for each step that requires a specific send time.

#### Schedule a Message Using Delay from Previous &#x20;

1. Click the Send at field for the required message step.

{% embed url="<https://app.supademo.com/demo/cmvhneo9s00pb160jilybybjb?utm_source=link>" %}

2. Select Delay from previous to schedule the message relative to the preceding step's send time.

{% embed url="<https://app.supademo.com/demo/cmvhnvn0j00rx2d0jdlzbl2gb?utm_source=link>" %}

2. Configure the delay as required, if prompted.
3. Review the schedule to ensure the message follows the intended sequence.

Use this option when messages should be sent at intervals relative to the previous step instead of at independently selected dates and times.

### 6. Configure Retry for Failed Sends &#x20;

1. Locate the Retry failed sends option in the message step settings.
2. Enable the option to automatically retry messages that fail to send.

{% embed url="<https://app.supademo.com/demo/cmvho02a900qe160jun9ckr2u?utm_source=link>" %}

3. Review the remaining message settings before proceeding.

This setting helps handle failed message sends without requiring each failed message to be managed manually. Retry behavior depends on the campaign's configured options.

### 7. Configure Additional Templates and Media &#x20;

For subsequent steps, such as Step 3, follow these instructions to select a template and configure its content.

1. Click Select Template.

{% embed url="<https://app.supademo.com/demo/cmvho2m3d00se2d0j6oncwa67?utm_source=link>" %}

2. Locate the required template, such as t14\_refer\_friends.
3. Select the checkbox on the template card.
4. Click Next to continue.

{% embed url="<https://app.supademo.com/demo/cmvho6lm700a2190j2l4lck19?utm_source=link>" %}

5. Click Upload IMAGE from media to open the media selection interface.

{% embed url="<https://app.supademo.com/demo/cmvhoiww500081f0jbi5j0xgi?utm_source=link>" %}

6. Select the required image thumbnail in the Select Media grid.
7. Click Send selected files to attach the chosen media.

{% embed url="<https://app.supademo.com/demo/cmvhok4us000a1f0jlbd9y8ak?utm_source=link>" %}

8. Click the Value dropdown for each template variable.
9. Select the appropriate contact field or fallback value for every variable.

{% embed url="<https://app.supademo.com/demo/cmvhololb00dl190jwk0ps5jp?utm_source=link>" %}

10. Click Select to confirm the template and apply it to the drip campaign.

{% embed url="<https://app.supademo.com/demo/cmvhon03100wd2d0jiruj7avb?utm_source=link>" %}

11. Configure the send time or delay for the step.<br>

Repeat the process for the remaining message steps, ensuring that every template has the correct variables, media, and scheduling configuration.

### 8. Configure Goal Conditions &#x20;

Goal conditions allow you to define when a contact should stop receiving further messages in the drip journey.

#### Add a Goal &#x20;

1. Click Add Goal to configure a goal condition.

{% embed url="<https://app.supademo.com/demo/cmvhoobio00rb160jwn7ewhl1?utm_source=link>" %}

2. Select the appropriate field for the condition.
3. Configure the condition to evaluate whether the intended goal has been achieved.

{% embed url="<https://app.supademo.com/demo/cmvhoppz6003v1f0joqq4au44?utm_source=link>" %}

4. Ensure the goal condition is configured in the appropriate step of the drip campaign.

#### Configure the Goal Action &#x20;

1. Locate the When Goal Is Met setting.
2. Select Stop campaign to stop the contact from receiving further steps when the goal condition is met.

{% embed url="<https://app.supademo.com/demo/cmvhosz0z00ru160j44gytmom?utm_source=link>" %}

Important: Goal conditions must be configured correctly in the relevant step for the campaign to evaluate whether the goal has been achieved. Adding a goal without configuring the appropriate condition may not produce the intended result.

### 9. Review the Drip Campaign &#x20;

1. Click Next: Review Campaign to proceed to the campaign review screen.

{% embed url="<https://app.supademo.com/demo/cmvhouo1300wg2d0j9o8wqqkr?utm_source=link>" %}

2. Click Steps to review the sequence of messages in the drip journey.

{% embed url="<https://app.supademo.com/demo/cmvhow4u400e3190jjh2s973y?utm_source=link>" %}

3. Verify the selected audience and enrollment settings.
4. Check the template selection and variable mappings for every step.
5. Verify that the required media files are attached.
6. Review the send dates, times, and delays.
7. Check the retry settings and goal conditions.
8. Confirm that the message sequence matches the intended campaign journey before completing the setup.

### 10. View Campaign Details and Analytics &#x20;

1. Click Go to campaigns to return to the campaign list.

{% embed url="<https://app.supademo.com/demo/cmvhoxmij00e8190js0tq6pbi?utm_source=link>" %}

2. Locate the relevant drip campaign, such as Ownchat Drip.
3. Click View Details on the campaign card to open the campaign details.

{% embed url="<https://app.supademo.com/demo/cmvhoyrmt00z32d0j4ayy5gs9?utm_source=link>" %}

4. Review the analytics available for each message step.

Use the step-level analytics to monitor message performance and review the results of the drip campaign.

### 11. Edit the Drip Journey &#x20;

1. Open the details of the required drip campaign.
2. Click Edit Journey to update the drip journey settings and goal conditions.

{% embed url="<https://app.supademo.com/demo/cmvhp4isv00sb160jyx0hnyvu?utm_source=link>" %}

3. Review the existing message steps.
4. Click Add Goal Filter to configure the goal conditions for your drip campaign. Define the required conditions to determine when a contact has achieved the goal and should stop receiving further messages.

{% embed url="<https://app.supademo.com/demo/cmvhpbt9c00zd2d0jkdnb4m35?utm_source=link>" %}

5. Locate the Field Name dropdown in the relevant condition or filter settings.

{% embed url="<https://app.supademo.com/demo/cmvhpd50u00eq190j40fma834?utm_source=link>" %}

6. Select the contact field you want to use.
7. Update the required journey settings and goal conditions.
8. Review the changes before completing the edit.

Ensure that the updated conditions match the intended audience and campaign exit behavior.

### 12. Return to the Campaign List &#x20;

1. Click the Back arrow to return to the campaign list.
2. Locate the required drip campaign.
3. Click Actions to open the available campaign options.

{% embed url="<https://app.supademo.com/demo/cmvhpfrqp0015400jvzhcm35b?utm_source=link>" %}

4. Select the appropriate action based on the task you want to perform.
5. Click here to refresh the data. Then, go to Step 1, click View Details, and review the analytics for each step of the drip campaign.

{% embed url="<https://app.supademo.com/demo/cmvhpgxwi00et190jonetuosk?utm_source=link>" %}

### 13. Cancel a Drip Campaign &#x20;

If you need to stop a drip campaign, follow these steps:

1. Open the relevant drip campaign.
2. Click Cancel Campaign to initiate cancellation.

{% embed url="<https://app.supademo.com/demo/cmvhpkwmn00sl160jbcp2fk6g?utm_source=link>" %}

3. Click Yes to confirm the cancellation.
4. Verify that the campaign status indicates that the campaign has been cancelled.

{% embed url="<https://app.supademo.com/demo/cmvhpn5rc001c400jmncldt9q?utm_source=link>" %}

Review the campaign status after confirmation to ensure the cancellation is reflected in the campaign list.\
\
Note: Once the campaign is scheduled, the steps will be processed automatically according to their configured send dates and times or delays. After the first step has been completed, the campaign status will display Step 1 Completed. You can refresh the campaign data, open View Details, and review the analytics for each step.

{% embed url="<https://app.supademo.com/demo/cmvhpu7uh00f1190jh34mvdib?utm_source=link>" %}

### Summary &#x20;

The Drip Campaign feature in Ownchat allows you to send up to 10 WhatsApp template messages to selected audience segments in a planned sequence. You can configure contact enrollment, personalize messages using template variables and fallback values, attach media, schedule messages using specific dates and times or delays, and retry failed sends.

Goal conditions help stop further messages when the specified goal is achieved. You can review the message sequence before completing the setup, monitor step-level analytics, edit journey settings and conditions, refresh campaign data, and cancel the campaign when required.

By configuring each step carefully, you can manage a structured messaging journey and deliver relevant messages to your selected audience.
